Version 4.2.4
October 25, 2011
Bug Fixes:
- Fixed a bug whereby errors that occurred while compressing files to an archive were not properly detected.
- Added logic that better handles certain file replacement scenarios thus reducing the likelihood of errors when compressing files to an archive.
- Fixed a crashing bug that could occur after performing multiple restore operations from the archive of a synchronizer document.
- Fixed a problem that could result in a crash if two or more synchronizations that target "Local Volumes (Admin Access)" were run at the same time.
- Fixed a problem that could result in a crash when updating the Analyze or Archive Panels while the document's synchronizer was being run.
- Fixed some issues with pre- and post- synchronization script dispatch.
- Fixed a backward compatibility issue that could occur when communicating with a 1.0.5 (or older) version of ChronoAgent.
Version 4.2.3
August 29, 2011
Enhancements:
- Implemented "Show invisible files" in the standard "Choose" dialog for sync targets.
- Implemented the "'Resume' document windows" preference setting to optionally bypass the Resume feature on Lion.
Bug Fixes:
- Fixed a bug in Lion where international dates were being improperly formatted.
- Fixed a bug whereby if a large file was being copied thus showing percentage completion, and the user clicked 'Skip' for that file, all subsequent large files that result in percentage completion being displayed would automatically be skipped.
Version 4.2.2
July 19, 2011
Enhancements:
- Ensured Mac OS X 10.7 'Lion' compatibility.
- A scheduled item can now be edited even if the associated document cannot be found/loaded.
- The status column in the Scheduled Documents Manager can now be resized.
- Several minor user interface modifications.
- Various cleanups regarding memory management.
Bug Fixes:
- Fixed a bug where certain multi-byte character strings used as document passwords would be improperly encrypted making it impossible to decrypt.
- Fixed a bug where simultaneous schedule editing would put ChronoSync in a state of limbo.
- Fixed a bug whereby ownership on packages was not being asserted after synchronization was complete.
- Fixed a bug that would, in very rare circumstances, attempt to treat an event-based sync as a time-based sync when checking to see if any time-based syncs needed to be run.
- Fixed a bug whereby newly instantiated container documents do not have the proper initial settings for the "Play sounds" properties.
- Fixed a bug where the Finder operations in the icon pop-up menu were not being properly disabled if the target resided on an agent connection.
- Fixed a bug where a new scheduled item might not run if the "run no more than once very" option was active.
- Fixed a bug whereby interacting with a sync document while a synchronization was running could result in erroneous errors being reported.
Version 4.2.1
April 14, 2011
Bug Fixes:
- Fixed a bug that could throw an exception when saving a synchronizer document that is configured in a certain way.
- Fixed a Lion keychain compatibility issue.
Version 4.2.0
April 6, 2011
Enhancements:
- File size statistics showing the number of bytes to be copied are displayed in the Trial Synchronization window.
- Full Undo/Redo support in the Trial Synchronization window.
- Added shortcut key equivalents to the 'Actions' in the Trial Synchronization window.
- The Trial Synchronization window now allows actions to be performed on multiple file-pair selections.
- A new multi-delete action is available when selecting multiple file-pairs.
- Support for "Services" added for selected file pairs in the Trial Synchronization window.
- When running a Trial Synchronization, the progress sheet will present an estimation of how much time remains.
- When a large file is being copied, a "Skip" button will enable and a running total of the bytes being copied is displayed.
- A "Compare" button added to the conflict sheet.
- Added the "When independent agent becomes available" scheduling method that watches for remote ChronoAgents to become available.
- New scheduling option to fine-tune the number of times a schedule can run in a certain time period.
- New scheduling option that will retry a synchronization if errors were found in the previous synchronization.
Bug Fixes:
- Fixed a bug where a sync wouldn't invoke manually if a schedule sync was missed and posted to the scheduler log.
- Fixed a bug whereby directories that were marked as read-only could not be moved to the archive.
- Fixed a problem with performance and memory inefficiencies when altering the dimmed states of entries in response to toggling their enabled states.
- Fixed a problem with sorting files by size in the Analyze panel.
- Fixed a bug whereby an attribute-only conflict the first time a file-pair is encountered will just get ignored and recorded as 'in sync' if a 'sync selection' action was invoked.
- Fixed a bug where the displayed date for the next scheduled sync would be incorrect if a user changed a time-based schedule to a non time-based schedule.
Version 4.1.2
December 7, 2010
Enhancements:
- Performs minor optimizations to the target volume after a bootable synchronization.
- Improved the way the Keychains folder is handled during a sync.
- Container documents now retain the width of the "Document Name:" column.
Bug Fixes:
- Fixed an information gathering problem that occurs when users pre-determine conflicts to be skipped.
- Fixed a problem whereby an exception can be raised if an advanced rule is removed from a saved sync document.
- Fixed a bug whereby replacing existing files during a sync would not apply filename case changes that may have been made to the original file.
- Fixed an instance in the French Preferences panel where the button size was too small to fit the recommended text.
Version 4.1.1
October 5, 2010
Enhancements:
- Enhanced the file size rule to now support "GB" as an option.
- Now performs "Move to Trash" operations more reliably.
- Added better exception handling.
- Changed the way skipped date roll backs are posted to the log so that they now appear as errors.
Bug Fixes:
- Fixed a problem with file size reporting.
- Fixed a bug where scheduled syncs would not run if the user had canceled a quit attempt.
- Fixed a problem where frequent updating of the preference file was preventing the system from going to sleep on its own.
- Fixed a problem where sync-on-mounts that targeted a volume connected with admin access would not work.
- Fixed a bug whereby documents created on activation were not created from the default document template.
- Fixed various target connection related bugs.
- Fixed an erroneous readiness warning regarding partition schemes on certain kinds of bootable backups.
- Fixed a problem with ejecting bootable destination targets.
- Fixed problems sending email notifications through certain types of mail servers.
- Fixed a bug whereby all in-agent file copies were never preserving HFS compression.
Version 4.1.0
July 13, 2010
Enhancements:
- Added new scheduling behaviors and options.
- Added email notifications for missed syncs.
- Added the ability to wake remote ChronoAgent computers from sleep.
- Added new preference settings so the background scheduler can better deal with missed syncs.
- Implemented a new 'sync-when-available' scheduling option when used with ChronoAgent for Mac.
- Implemented a new 'when specific volume mounts' scheduling option.
- Unique completion sounds on a per-document basis can be played on error or success for both Synchronizer and Container documents
- New features and improved interaction in the Scheduled Documents Manager window.
- Added the ability to run scripts without having to run the Synchronizer document.
- Agent performance optimizations.
- Significantly improved synchronization performance and error handling.
- User interface improvements and enhancements.
Bug Fixes:
- Fixed a bug whereby attention sounds weren't being played within containers.
- Fixed a bug where 'busy' syncs were skipped in a container with no real indication of what happened.
- Fixed a problem where Disk Space used/available in ChronoSync reported differently than Finder for network volume.
- Fixed a problem with Trial Sync window corruption where expanding file/folder information would result in expanding the window off the bottom of the screen.
- Performed various cleanups regarding memory management including fixing numerous small memory leaks.
- Fixed some issues with how DNS names are resolved.
- Fixed a bug whereby if you switched panels on a newly opened Synchronizer document while it still displayed "Preparing document", the program would crash.
- Fixed a bug where it was possible for a license file to be created with a blank line as the first line of the file causing the registration to fail.
- Fixed a bug whereby an alias to a folder on a destination target would get replaced by a 'real' folder even when resolve aliases was ON.
- Fixed a bug that would result in an eventual crash when repeatedly restoring files from a Synchronizer document's archive.
- Worked around an issue with SMB where it wouldn't allow read-only folders to be renamed.
- Fixed a bug that would cause the Backgrounder to crash when putting the system to sleep.
Version 4.0.5
December 29, 2009
Enhancements:
- Added the ability to force case sensitivity tests even when volumes report themselves as case insensitive. Increases compatibility with some NAS devices and file servers (contact tech support for instructions how to enable this behavior).
Bug Fixes:
- Fixed a bug that would cause files added to an archive to not get compressed.
- Fixed a bug where case sensitivity tests were only being performed on file servers.
- Fixed a bug that could result in improper handling of errors that occur within package files with the Dissect Packages setting turned ON.
- Fixed a cosmetic problem with resizing the Trial Sync selector sheet window on Snow Leopard systems.
- Implemented workarounds to numerous "Parameter Errors" some Snow Leopard users encounter when connecting to a server via SMB.
Version 4.0.4
August 7, 2009
Enhancements:
- Online help changes related to bootable backups.
- Manual changes related to bootable backups.
- Various changes to the installer.
Bug Fixes:
- Fixed problems that occurred when installing/using the program in some Directory Service environments.
- Fixed various display glitches.
NOTE: When using the program in a Directory Service environment, you should contact technical support if the default behavior isn't adequate for your needs.
Version 4.0.3
June 10, 2009
Enhancements:
- Added workaround logic for NTFS-3G bugs.
- When a deletion is performed in the Archive panel, the sync document is now marked as dirty.
- Now displays an informative message when a "Compare" operation is attempted with no valid comparison helpers available.
- Installer improvements.
Bug Fixes:
- Fixed a problem whereby, in specific scenarios, conflicts encountered in scheduled container sync documents would result in a hang.
- Fixed a bug whereby mismatched attributes in conflict sheets presented in container sync documents would not be highlighted in red.
- Fixed a problem that would cause the application to hang if there were multiple items scheduled to run at application termination.
- Fixed a bug where certain icons would not display if the local agent had not been installed.
- Fixed a potential crash when updating nested/expanded folders in the Analyze panel.
- Fixed various bugs related to package aggregation when the sync target was itself a package.
- Fixed a bug whereby the file/folder information in the Analyze panel was being redrawn improperly if the split view was partially or fully closed while the window was resized.
- Fixed a bug whereby adjustments to the filename column width in the Archive panel would not persist after a file at least one level deep in the outline view was deleted.
- Fixed a bug whereby changes to the email recipient address would not be recorded if the user clicked out of the field by clicking on the "Custom subjects" checkbox.
- Fixed a bug whereby the first couple lines on the second page of the analysis report could be skipped, depending on sync document settings and how the report paginated.
- Fixed an exception/potential crash that could occur when file-pairs in the Analyze panel suddenly disappear (often manifested by toggling "Show All" quickly).
- Fixed a bug whereby clicking "Pause" during a sync when a file was in the midst of being copied could result in the synchronizer remaining paused indefinitely.
Version 4.0.2
March 25, 2009
Enhancements:
- Implemented changes that allow the program to be moved outside the Applications and Utilities folder.
- Added a check to see if the user has opened up a backup copy of a sync or container document.
- Added a "Secure connection" message in the Setup panel if the agent connection is encrypted.
- Added an "Unable to locate target" readiness warning.
- Minor changes to the online help.
- Minor installer modifications.
- Minor uninstaller modifications.
Bug Fixes:
- Fixed an exception that gets raised when running on an un-named computer.
- Fixed a crash that could occur when certain types of servers failed to mount.
- Fixed a crash that could occur when copying large files over a secure agent connection.
- Fixed a problem with the pop-up icon shortcuts in the Conflict sheet dialog.
- Fixed a problem typing in dates in the Modification Date rule.
- Fixed the SSL plugin within email notifications to run correctly as a universal binary.
- Added code-signing so that there should not be anymore firewall problems with Leopard.
- Changed the way keychains are handled to ensure the keychain file is created with privileges that allow ChronoSync to access it.
- Minor layout changes to some buttons in Japanese.
- Minor layout changes to table widths in German.
Version 4.0.1
January 21, 2009
Bug Fixes:
- Fixes a problem that some users had registering the program.
- Fixes a long stall that occurred when opening documents and launching the application on some user's systems.
- Fixed some problems that occurred when the base language was not represented by a Roman text system. This problem could manifest itself as failure to launch, inability to communicate with agents and possibly random crashes.
- Fixed a bug whereby if you ran a Trial Sync and then hit "Cancel" from the Trial Sync selector window, any file-pair scanned that was in-sync would have their "Last Synchronized" time stamp updated if it was previously set to "never".
- Modified the intelligence behind the "Timestamps" attribute trigger so that it ignores modification dates for files if the user has also enabled the "Modification Date" data trigger.
- Added the ability to disable ChronoSync's attempt to mount file servers asynchronously via a public plist entry.
- Added an "Update all users" custom option to the ChronoSync installer. This was always being done in previous installers, but is now an optional step in the installation process. Users installing ChronoSync on FIle Servers will typically want to turn OFF this step so the installer doesn't try to clean up each and every user's home folder. Users in certain Directory Services controlled environments may also want to consider turning this option off.
- Addressed some permission issues in the installer.
Version 4.0.0
January 5, 2009
Features & Enhancements:
- The ChronoSync download is still contained in a disk image however the application is now installed using an installer
- Able to connect to a ChronoAgent
- Added a new Connections panel in Preferences to set up and maintain connections to different agents
- ChronoSync is now able to perform bootable backups
- Better restore options in the Archive panel
- A new 4.0 file format that uses significantly less memory consumption during loads/saves of Synchronizer documents, has faster load/save times and produces slightly smaller documents
- Can now reset Preferences to their default "factory" settings
- A new "Access Restriction" feature on documents to provide a lightweight form of security
- "Readiness" messages are now displayed at the bottom of each Synchronizer document, reporting whether or not the synchronizer can be invoked
- Several new options in the Options panel
- New rules added to the Rules panels
- A new user interface throughout the application
- More Help buttons placed throughout the application
- Container documents now have their own "panelized" interface, similar to that of the Synchronizer documents
- More detailed file information in the Analyze panel and the Trial Sync window
- Rule templates are now available for common rules
- Document templates can now be defined for those documents that are commonly used
To view the release notes for version 3.0 and earlier, click here...